WhisperKool Self-Contained – SC PRO 8000

WhisperKool Self-Contained – SC PRO 8000

• Advanced blower fans
• Condensate management system
• Smart refrigerant metering
• Liquid-temperature-measuring bottle probe
• Advanced digital controller
• Coated evaporator coil Front or rear power switch
• Single-piece mounting bracket

Cellar Size: Approx. 1000 cu. ft. when cellar is fully insulated and sealed with proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit)

BTU/h w/85°F air entering condenser coil: 2253

Dimensions:17.5"L x 14.25"W x 15.75"H

Refrigerant:R-134a HP:1/6+ Voltage Rating:115V (20-amp dedicated circuit required); 230V (subject to availability)

Weight:65 lbs

Amps:3.7 (running amps)

Drain Line:1/2" ID clear plastic tubing Installation:Through-the-wall, partially ducted Thermostat:Advanced digital controller, liquid-temperature-measuring bottle probe (retractable cable) Temp.

Delta:Can maintain a 55°F cellar temperature with up to 85°F condenser air intake temperature

Ducting Options:Exhaust air can be ducted using the optional ducting kit

Warranty:Two-year limited warranty (parts and labor) / Five-year limited warranty (compressor)

The BTU/h value shown here is a theoretical number. There are often circumstances under which a cellar design may require a larger unit due to variables not accounted for in the formula. For example, these variables could be building materials (such as glass, stone, concrete, etc.) which do not offer the insulation capacity required to maintain the optimal cellar environment. We recommend purchasing a unit with a larger capacity to compensate for these unaccounted-for variables. An undersized unit can lead to premature failure and will most likely prevent the cellar from reaching your desired temperature.

Be sure to check out our entire selection of WhisperKOOL products.